What is the difference between spotlights and tube lights
Release time:
2025-04-29 10:47
Choose spotlights based on the area of your ceiling, choose larger ones for larger ones, smaller ones for smaller ones, so that they look symmetrical. Generally, for TV backgrounds, choose smaller ones. If the entire flat roof is 4, a larger one would be better. Now there are LED spotlights, although the effect is not as good as before, they are also good, energy-saving, and not easy to break. The common sizes of openings for spotlights are 2 inches, 2.5 inches, 3 inches, 3.5 inches, 4 inches, 5 inches, 6 inches, and 8 inches, all of which refer to inches. 1 inch=25.4mm, which means the general opening in the industry is 4 inches, or 10cm. The opening for spotlights (ceiling lights) is generally 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 90mm, 100mm, etc.
How to install spotlights
When installing spotlights, transformers are usually installed in the holes without any safety issues. Because the ceiling has a large space and good heat dissipation. 1、 The common problem with installing spotlights is that some workers did not arrange the power cord properly during the early stages of construction, resulting in the inability to find the wire through the light hole behind the ceiling. Therefore, it is important to pay attention to the placement of the wire. Electricians and carpenters need to cooperate well. 2、 Another issue is that some lamp holes are excavated inaccurately, resulting in inconsistent dimensions or spacing, making them look awkward.
Method for selecting spotlights
Spotlights are generally used to enhance the lighting of decorative objects, usually embedded in ceilings or walls. When spotlights work, they generally emit high temperatures, so it is necessary to purchase high-quality products, otherwise there may be safety hazards. When using spotlights, they should be paired with transformers, and high-quality bulbs should also be selected, otherwise the bulbs of the spotlights are easily damaged. Think about it, replacing the bulbs in the ceiling can be quite troublesome.
Related News
2025-04-29
The difference between ceiling lights and tube lights
Embedded: Directly embedded into the ceiling is the most common installation method for ceiling lights, and it is also relatively beautiful. Compared with others
2025-04-29
Is the LED ceiling light good
What should we do if the LED ceiling light doesn't light up? Firstly, we need to check the LED ceiling light and power wiring. Here, I would like to remind everyone of a common knowledge about checking electric lights.
2025-04-29
The difference between LED bulbs and energy-saving lamps
After understanding the key points of indoor and outdoor LED bulb assembly, the next step is the power connection method. LED lights generally have a voltage of 12V DC
Follow us
Tel
Copyright © Zhongshan Lumaleds Technology Co., Ltd. All Rights reserved. SEO